Archive for June, 2015

Make a Planter from a Discarded Weber Grill

IMG_4283 It all started when I decided to tidy up the clutter of junk that had accumulated behind my garage. One piece that I came across was an old 18 inch Weber grilling kettle. The legs were gone and the receptacles that hold the legs on had rusted off. The grates were gone and the metal clips that hold the grates were bent or broken. Clearly, the kettle would never be used for a grill again. Then an idea invaded my thoughts. I could use it as a planter. All I would need would be some wooden legs. The vent holes in the bottom would help with drainage.

IMG_4275 IMG_4278

To hold the kettle I collected up some short pieces of 2X6 all about 7 inches long and cut a 22.5 degree angle on each end. When 8 of these are fitted together in a circle they make an octagon with a center that is a perfect size to drop in the kettle. It was then just a matter of making some short legs with 2X4s. A little paint and some casters on the legs completed the project.



For planting, I put a piece of garden fabric over the vent holes in the bottom to keep the dirt from falling out. Then I added several handfuls of wood chips to help with drainage. Along the sides of the planter I added some Styrofoam insulation pieces to help keep the plant roots from getting too hot. A metal container generally does not work well as a planter without some sort of insulation. After that it was just a matter of filling the container with potting soil and putting in some plants.

I only had a few plants on hand to put in the planter. I will want to add a few more to fill out the space. You can see my finished product at the top of this page. It is sitting next to the matching chair that I made a while back.

I invite you to visit my curios store where you will find a number of unique items for sale.